Manual sections

Wiring diagrams

• Abbreviations
• Airbag
• Antenna Systems
• Anti-Lock/traction Control
• Automatic HVAC System
• Automatic Trans
• Axle Shafts
• Basic Trouble Shooting
• Body Electrical
• Brakes
• Cabin Air Filter
• Charging System
• Check Lists
• Clutches Manual & Hydraulic
• Communication Devices
• Controller Area Network (CAN) - Lancer Evolution: Diagnosis
• Controller Area Network (CAN) - Lancer: Diagnosis
• Cooling System (Mechanical)
• Cruise Control Systems
• Diagnostic Connector Locations
• Door Locks & Anti-Theft Systems
• Drive Cycles
• Driveline/axles
• Driveshaft & Universal Joints
• DTC Index
• Electrical Component Locations
• Emission Applications
• Engine
• Engine Control Systems
• Engine Performance
• Exhaust
• Fuel System
• Fuses & Circuit Breakers
• Gauges & Instrument Panels
• Hoist/jack
• Identification
• Ignition System
• Keyless Operation System (Kos) - Lancer Evolution: Diagnosis
• Lubrication System
• Manual & Power Steering
• Manual HVAC System
• Manual Trans
• Mechanical
• Mechanical - Hydraulic
• Metric Conversions
• Mirrors
• Mode 6 - 1997-2012 Mitsubishi
• Oem General Information
• Overhaul - Lancer Evolution: Removal & Installation
• Parking Brake System
• Reset Procedures
• Specifications
• Starter
• Steering
• Suspension Front
• Suspension Rear
• Testing & Diagnostics
• Traction Control Disable
• Transmission
• Twin Clutch-Sportronic Shift Trans (Tc-Sst) - Lancer Evolution
• Wheel & Tire System
• Windows

Repair manual

Controller Area Network (CAN) - Lancer: Diagnosis Mitsubishi Lancer X

Step-by-step instructions on "Controller Area Network (CAN) - Lancer: Diagnosis" for Mitsubishi Lancer X (2007–2010). Pick an article — removal, installation, adjustment and diagnostics with illustrations.

33subsections

33articles

141illustrations

DIAGNOSIS CAN-C

1 article

• DIAGNOSIS CAN-C

TEST EQUIPMENT

1 article

• TEST EQUIPMENT

EXPLANATION ABOUT THE SCAN TOOL (M.U.T.-III) CAN BUS DIAGNOSTICS

1 article

• EXPLANATION ABOUT THE SCAN TOOL (M.U.T.-III) CAN BUS DIAGNOSTICS 11

ON-BOARD DIAGNOSTICS

1 article

• ON-BOARD DIAGNOSTICS

HOW TO CONNECT THE SCAN TOOL (M.U.T.-III)

1 article

• HOW TO CONNECT THE SCAN TOOL (M.U.T.-III)

HOW TO DIAGNOSE THE CAN BUS LINE

1 article

• HOW TO DIAGNOSE THE CAN BUS LINE

CAN BUS DIAGNOSTICS TABLE

1 article

• CAN BUS DIAGNOSTICS TABLE 19

DIAGNOSTIC ITEM 1: Diagnose when the scan tool cannot receive the data sent by ETACS-ECU.

1 article

• DIAGNOSTIC ITEM 1: Diagnose when the scan tool cannot receive the data sent by ETACS-ECU. 1

TROUBLE JUDGEMENT CONDITIONS

1 article

• TROUBLE JUDGEMENT CONDITIONS

TROUBLESHOOTING HINTS

1 article

• TROUBLESHOOTING HINTS

DIAGNOSIS

1 article

• DIAGNOSIS 7

DIAGNOSTIC ITEM 2: Malfunction of the ETACS-ECU.

1 article

• DIAGNOSTIC ITEM 2: Malfunction of the ETACS-ECU.

TROUBLESHOOTING HINT

1 article

• TROUBLESHOOTING HINT

DIAGNOSTIC ITEM 3: Abnormal short between the CAN-C bus lines.

1 article

• DIAGNOSTIC ITEM 3: Abnormal short between the CAN-C bus lines. 25

DIAGNOSTIC ITEM 6: Diagnose when the scan tool cannot receive the data sent by TCM.

1 article

• DIAGNOSTIC ITEM 6: Diagnose when the scan tool cannot receive the data sent by TCM. 1

DIAGNOSTIC ITEM 7: Diagnose when the scan tool cannot receive the data sent by ABS-ECU.

1 article

• DIAGNOSTIC ITEM 7: Diagnose when the scan tool cannot receive the data sent by ABS-ECU. 1

DIAGNOSTIC ITEM 8: Diagnose when the scan tool cannot receive the data sent by ECM.

1 article

• DIAGNOSTIC ITEM 8: Diagnose when the scan tool cannot receive the data sent by ECM. 1

DIAGNOSTIC ITEM 9: Diagnose the lines between the ETACS-ECU and joint connector (CAN2).

1 article

• DIAGNOSTIC ITEM 9: Diagnose the lines between the ETACS-ECU and joint connector (CAN2). 1

DIAGNOSTIC ITEM 10: Diagnose the lines between joint connector (CAN2) and joint connector (CAN3).

1 article

• DIAGNOSTIC ITEM 10: Diagnose the lines between joint connector (CAN2) and joint connector (CAN3). 1

DIAGNOSTIC ITEM 11: Diagnose when the scan tool cannot receive the data sent by KOS-ECU.

1 article

• DIAGNOSTIC ITEM 11: Diagnose when the scan tool cannot receive the data sent by KOS-ECU. 1

DIAGNOSTIC ITEM 12: Diagnose when the scan tool cannot receive the data sent by WCM.

1 article

• DIAGNOSTIC ITEM 12: Diagnose when the scan tool cannot receive the data sent by WCM. 1

DIAGNOSTIC ITEM 13: Diagnose when the scan tool cannot receive the data sent by SRS-ECU.

1 article

• DIAGNOSTIC ITEM 13: Diagnose when the scan tool cannot receive the data sent by SRS-ECU. 1

DIAGNOSTIC ITEM 14: Diagnose when the scan tool cannot receive the data sent by occupant classification-ECU.

1 article

• DIAGNOSTIC ITEM 14: Diagnose when the scan tool cannot receive the data sent by occupant classification-ECU. 1

DIAGNOSTIC ITEM 15: Diagnose when the scan tool cannot receive the data sent by A/C-ECU.

1 article

• DIAGNOSTIC ITEM 15: Diagnose when the scan tool cannot receive the data sent by A/C-ECU. 1

DIAGNOSTIC ITEM 16: Diagnose when the scan tool cannot receive the data sent by radio and CD player or CD changer.

1 article

• DIAGNOSTIC ITEM 16: Diagnose when the scan tool cannot receive the data sent by radio and CD player or CD changer. 2

DIAGNOSTIC ITEM 17: Diagnose when the scan tool cannot receive the data sent by CAN box unit.

1 article

• DIAGNOSTIC ITEM 17: Diagnose when the scan tool cannot receive the data sent by CAN box unit. 1

DIAGNOSTIC ITEM 18: Diagnose when the scan tool cannot receive the data sent by satellite radio tuner.

1 article

• DIAGNOSTIC ITEM 18: Diagnose when the scan tool cannot receive the data sent by satellite radio tuner. 1

DIAGNOSTIC ITEM 19: Diagnose when the scan tool cannot receive the data sent by hands free module.

1 article

• DIAGNOSTIC ITEM 19: Diagnose when the scan tool cannot receive the data sent by hands free module. 1

DIAGNOSTIC ITEM 20: Diagnose when the scan tool cannot receive the data sent by combination meter.

1 article

• DIAGNOSTIC ITEM 20: Diagnose when the scan tool cannot receive the data sent by combination meter. 1

DIAGNOSTIC ITEM 21: Short to power supply or ground in both CAN_H and CAN_L lines.

1 article

• DIAGNOSTIC ITEM 21: Short to power supply or ground in both CAN_H and CAN_L lines. 45

DIAGNOSTIC ITEM 22: Diagnose the ETACS-ECU, joint connector (CAN1) or lines between ETACS-ECU and joint connector (CAN1).

1 article

• DIAGNOSTIC ITEM 22: Diagnose the ETACS-ECU, joint connector (CAN1) or lines between ETACS-ECU and joint connector (CAN1). 1

DIAGNOSTIC ITEM 23: Short to power supply or ground, open circuit or line-to-line short in the CAN-B bus lines.

1 article

• DIAGNOSTIC ITEM 23: Short to power supply or ground, open circuit or line-to-line short in the CAN-B bus lines. 16

CAN COMMUNICATION-RELATED DTC (U-CODE) TABLE

1 article

• CAN COMMUNICATION-RELATED DTC (U-CODE) TABLE