FASTENER TIGHTENING SPECIFICATIONS
| Item | Specification |
|---|---|
| Armature plate mounting bolt | 16 ± 1 N.m (12 ± 1 ft-lb) |
| Discharge flexible hose mounting bolt (compressor side) | 25 ± 4 N.m (18 ± 3 ft-lb) |
| Discharge flexible hose mounting nut (condenser side) | 4.9 ± 0.9 N.m (43 ± 8 in-lb) |
| Connection between the liquid pipe A and B | 13 ± 1 N.m (115 ± 9 in-lb) |
| Liquid pipe A mounting bolt (condenser side) | 4.9 ± 0.9 N.m (43 ± 8 in-lb) |
| Suction flexible hose mounting bolt (compressor side) | 25 ± 4 N.m (18 ± 3 ft-lb) |
| Suction flexible hose mounting nut (heater unit side) | 4.9 ± 0.9 N.m (43 ± 8 in-lb) |
| Front deck crossmember mounting bolt (left side) | 23 ± 6 N.m (17 ± 4 ft-lb) |
| Front deck crossmember mounting bolt (right side) | 20 ± 5 N.m (15 ± 3 ft-lb) |
| Front deck crossmember mounting bolt (front deck side) | 20 ± 5 N.m (15 ± 3 ft-lb) |
FASTENER TIGHTENING SPECIFICATIONS
GENERAL SPECIFICATIONS
| Item | Standard value | |
|---|---|---|
| Heater control assembly | Rotary type | |
| A/C switch | Push-button type | |
| Compressor model, type | MSC90CAS, Scroll type | |
| Refrigerant | Type | R134a (HFC-134a) |
| Amount g (oz) | 480 - 520 (16.9 - 18.3) | |
GENERAL SPECIFICATIONS
SERVICE SPECIFICATIONS
| Item | Standard value |
|---|---|
| Idle speed r/min | 700 ± 50 |
| Idle-up speed r/min | 800 ± 50 |
| Air gap (A/C compressor clutch) mm (in) | 0.3 - 0.5 (0.012 - 0.020) |
SERVICE SPECIFICATIONS
See also:
• DIAGNOSTIC TROUBLE CODE
• DIAGNOSTIC TROUBLE CODE