Home ReviewsRefund
Home/Mitsubishi/Lancer/Mitsubishi Lancer IX (2000-2007)/Repair manual/Overhaul - Except Evolution: Removal & Installation/>> B << O-RING INSTALLATION
Contents Wiring diagrams Section: Overhaul - Except Evolution: Removal & Installation All sections

>> B << O-RING INSTALLATION Mitsubishi Lancer IX

Overhaul - Except Evolution: Removal & Installation 2 illustrations

>> B << O-RING INSTALLATION

Install a new O-ring to the outer groove of the oil pump, and apply ATF or petroleum jelly (Vaseline) to the O-ring.

Scheme 822

Scheme 822: DISASSEMBLY AND ASSEMBLY
Scheme 822: DISASSEMBLY AND ASSEMBLY

Required Special Tools

  1. MB991628: Spring Compressor
  2. MD998907: Spring Compressor
  3. MD998924: Spring Compressor Retainer

Scheme 823

Scheme 823: << A >> SNAP RING REMOVAL
Scheme 823: << A >> SNAP RING REMOVAL
  1. Set special tools MD998907 and MD998924 as shown in the illustration.
  2. Compress the return spring and remove the snap ring.