TIGHTENING TORQUE INDICATION
The tightening torque indicates a median and its tolerance by a unit of N+/-m (in-lb) or N+/-m (ft-lb). For fasteners with no assigned torque value, refer to TIGHTENING TORQUE.
GENERAL SPECIFICATIONS
| ITEM | CS6A SNSEL 3M | CS6A SRSEL | CS6A SNMEL 2M/7M/3M | |||
|---|---|---|---|---|---|---|
| 2M/7M | 3M | |||||
| Vehicle dimension mm (in) | Overall length | 1 | 4,510 (177.6) | 4,510 (177.6) | 4,510 (177.6) | 4,510 (177.6) |
| Overall width | 2 | 1,695 (66.7) | 1,695 (66.7) | 1,695 (66.7) | 1,695 7) | |
| Overall height (unladen) | 3 | 1,430 (56.3) | 1,430 (56.3) | 1,430 (56.3) | 1,430 (56.3) | |
| Wheelbase | 4 | 2,600 (102.4) | 2,600 (102.4) | 2,600 (102.4) | 2,600 (102.4) | |
| Tread-front | 5 | 1,470 (57.9) | 1,470 (57.9) | 1,470 (57.9) | 1,470 (57.9) | |
| Tread-rear | 6 | 1,470 (57.9) | 1,470 (57.9) | 1,470 (57.9) | 1,470 (57.9) | |
| Overhang-front | 7 | 895 (35.2) | 895 (35.2) | 895 (35.2) | 895 (35.2) | |
| Overhang-rear | 8 | 1,015 (40.0) | 1,015 (40.0) | 1,015 (40.0) | 1,015 (40.0) | |
| Minimum running ground clearance | 9 | 150 (5.9) < Vehicles with 14 x 5JJ wheel > 165 (6.5) < Vehicles with 15 x 6JJ wheel > | ||||
| Vehicle weight kg (lb) | Curb weight | 1,181 (2,604) | 1,232 (2,716) | 1,201 (2,648) | 1,211 (2,670) | |
| Gross vehicle weight rating | 1,660 (3,660) | 1,660 (3,660) | 1,660 (3,660) | 1,660 (3,660) | ||
| Gross axle weight rating-front | 920 (2,028) | 920 (2,028) | 920 (2,028) | 920 (2,028) | ||
| Gross axle weight rating-rear | 780 (1,720) | 780 (1,720) | 780 (1,720) | 780 (1,720) | ||
| Seating capacity | 5 | |||||
| Engine | Model No. | 4G94 | ||||
| Displacement | 2.0L | |||||
| Transaxle | Model No. | F5M42 | F4A42 | F5M42 | ||
| Type | 5-speed manual | 4-speed automatic | 5-speed manual | |||
| Fuel system | Fuel supply system | Electronic controlled multiport fuel injection | ||||
GENERAL SPECIFICATIONS
| ITEM | CS6A SRMEL 2M/7M/3M | CS6A SRDEL 2M/7M/3M | CS6A SNHEL 2M/7M/3M | CS6A SRHEL 2M/7M/3M | ||
|---|---|---|---|---|---|---|
| Vehicle dimension mm (in) | Overall length | 1 | 4,510 (177.6) | 4,510 (177.6) | 4,510 (177.6) | 4,510 (177.6) |
| Overall width | 2 | 1,695 (66.7) | 1,695 (66.7) | 1,695 (66.7) | 1,695 (66.7) | |
| Overall height (unladen) | 3 | 1,430 (56.3) | 1,430 (56.3) | 1,430 (56.3) | 1,430 (56.3) | |
| Wheelbase | 4 | 2,600 (102.4) | 2,600 (102.4) | 2,600 (102.4) | 2,600 (102.4) | |
| Tread-front | 5 | 1,470 (57.9) | 1,470 (57.9) | 1,470 (57.9) | 1,470 (57.9) | |
| Tread-rear | 6 | 1,470 (57.9) | 1,470 (57.9) | 1,470 (57.9) | 1,470 (57.9) | |
| Overhang-front | 7 | 895 (35.2) | 895 (35.2) | 895 (35.2) | 895 (35.2) | |
| Overhang-rear | 8 | 1,015 (40.0) | 1,015 (40.0) | 1,015 (40.0) | 1,015 (40.0) | |
| Minimum running ground clearance | 9 | 150 (5.9) < Vehicles with 14 x 5JJ wheel > 165 (6.5) < Vehicles with 15 x 6JJ wheel > | ||||
| Vehicle weight kg (lb) | Curb weight | 1,231 (2,714) | 1,240 (2,734) | 1,225 (2,701) | 1,245 (2,745) | |
| Gross vehicle weight rating | 1,660 (3,660) | 1,660 (3,660) | 1,660 (3,660) | 1,660 (3,660) | ||
| Gross axle weight rating-front | 920 (2,028) | 920 (2,028) | 920 (2,028) | 920 (2,028) | ||
| Gross axle weight rating-rear | 780 (1,720) | 780 (1,720) | 780 (1,720) | 780 (1,720) | ||
| Seating capacity | 5 | |||||
| Engine | Model No. | 4G94 | ||||
| Displacement | 2.0L | |||||
| Transaxle | Model No. | F4A42 | F4A42 | F5M42 | F4A42 | |
| Type | 4-speed automatic | 4-speed automatic | 5-speed manual | 4-speed automatic | ||
| Fuel system | Fuel supply system | Electronic controlled multiport fuel injection | ||||
GENERAL SPECIFICATIONS
TIGHTENING TORQUE
Each torque value in the table is a standard value for tightening under the following conditions.
- Bolts, nuts and washers are all made of steel and plated with zinc.
- The threads and bearing surface of bolts and nuts are all in dry condition.
The values in the table are not applicable
- If toothed washers are inserted.
- If plastic parts are fastened.
- If bolts are tightened to plastic or die-cast inserted nuts.
- If self-tapping screws or self-locking nuts are used
Standard bolt and nut tightening torque
| THREAD SIZE | STANDARD TIGHTENING TORQUE | |||
|---|---|---|---|---|
| NOMINAL BOLT DIAMETER (mm) | PITCH (mm) | HEAD MARK "4" | HEAD MARK "7" | HEAD MARK "8" |
| M5 | 0.8 | 2.5 +/- 0.5 N+/-m (23 +/- 4 in-lb) | 5.0 +/- 1.0 N+/-m (44 +/- 9 in-lb) | 6.0 +/- 1.0 N+/-m (53 +/- 9 in-lb) |
| M6 | 1.0 | 5.0 +/- 1.0 N+/-m (44 +/- 9 in-lb) | 9.0 +/- 2.0 N+/-m (79 +/- 18 in-lb) | 10 +/- 2 N+/-m (89 +/- 17 in-lb) |
| M8 | 1.25 | 12 +/- 2 N+/-m (107 +/- 17 in-lb) | 22 +/- 4 N+/-m (16 +/- 3 ft-lb) | 25 +/- 4 N+/-m (18 +/- 3 ft-lb) |
| M10 | 1.25 | 24 +/- 4 N+/-m (18 +/- 3 ft-lb) | 44 +/- 10 N+/-m (33 +/- 7 ft-lb) | 53 +/- 7 N+/-m (39 +/- 5 ft-lb) |
| M12 | 1.25 | 41 +/- 8 N+/-m (30 +/- 6 ft-lb) | 83 +/- 12 N+/-m (61 +/- 9 ft-lb) | 98 +/- 12 N+/-m (72 +/- 9 ft-lb) |
| M14 | 1.5 | 73 +/- 12 N+/-m (54 +/- 9 ft-lb) | 140 +/- 20 N+/-m (104 +/- 14 ft-lb) | 155 +/- 25 N+/-m (115 +/- 18 ft-lb) |
| M16 | 1.5 | 110 +/- 20 N+/-m (81 +/- 15 ft-lb) | 210 +/- 30 N+/-m (155 +/- 22 ft-lb) | 235 +/- 35 N+/-m (174 +/- 25 ft-lb) |
| M18 | 1.5 | 165 +/- 25 N+/-m (122 +/- 18 ft-lb) | 300 +/- 40 N+/-m (222 +/- 29 ft-lb) | 340 +/- 50 N+/-m (251 +/- 37 ft-lb) |
| M20 | 1.5 | 225 +/- 35 N+/-m (166 +/- 26 ft-lb) | 410 +/- 60 N+/-m (303 +/- 44 ft-lb) | 480 +/- 70 N+/-m (354 +/- 52 ft-lb) |
| M22 | 1.5 | 300 +/- 40 N+/-m (222 +/- 29 ft-lb) | 555 +/- 85 N+/-m (410 +/- 62 ft-lb) | 645 +/- 95 N+/-m (476 +/- 70 ft-lb) |
| M24 | 1.5 | 395 +/- 55 N+/-m (292 +/- 40 ft-lb) | 735 +/- 105 N+/-m (543 +/- 77 ft-lb) | 855 +/- 125 N+/-m (631 +/- 92 ft-lb) |
TIGHTENING TORQUE
Flange bolt and nut tightening torque
| THREAD SIZE | STANDARD TIGHTENING TORQUE | |||
|---|---|---|---|---|
| NOMINAL BOLT DIAMETER (mm) | PITCH (mm) | HEAD MARK "4" | HEAD MARK "7" | HEAD MARK "8" |
| M6 | 1.0 | 5.0 +/- 1.0 N+/-m (44 +/- 9 in-lb) | 10 +/- 2 N+/-m (89 +/- 17 in-lb) | 12 +/- 2 N+/-m (107 +/- 17 in-lb) |
| M8 | 1.25 | 13 +/- 2 N+/-m (111 +/- 22 in-lb) | 24 +/- 4 N+/-m (18 +/- 3 ft-lb) | 27 +/- 5 N+/-m (20 +/- 4 ft-lb) |
| M10 | 1.25 | 26 +/- 4 N+/-m (19 +/- 3 ft-lb) | 49 +/- 9 N+/-m (36 +/- 7 ft-lb) | 58 +/- 7 N+/-m (43 +/- 5 ft-lb) |
| M10 | 1.5 | 24 +/- 4 N+/-m (18 +/- 3 ft-lb) | 45 +/- 8 N+/-m (33 +/- 6 ft-lb) | 55 +/- 10 N+/-m (41 +/- 7 ft-lb) |
| M12 | 1.25 | 46 +/- 8 N+/-m (34 +/- 6 ft-lb) | 95 +/- 15 N+/-m (70 +/- 11 ft-lb) | 105 +/- 15 N+/-m (78 +/- 11 ft-lb) |
| M12 | 1.75 | 43 +/- 8 N+/-m (32 +/- 6 ft-lb) | 83 +/- 12 N+/-m(61 +/- 9 ft-lb) | 98 +/- 12 N+/-m (72 +/- 9 ft-lb) |
TIGHTENING TORQUE
LUBRICANT CAPACITY TABLE
| DESCRIPTION | SPECIFICATION | |
|---|---|---|
| Engine oil dm 3 (qt) | Oil pan (excluding oil filter) | 3.5 (3.7) |
| Oil filter | 0.3 (0.32) | |
| Engine coolant dm 3 (qt) | 5.0 (5.3) | |
| Manual transaxle dm 3 (qt) | 2.2 (2.3) | |
| Automatic transaxle dm 3 (qt) | 7.7 (8.1) | |
| Power steering dm 3 (qt) | 1.2 (1.3) | |
| Fuel tank dm 3 (gal) | 50 (13.2) | |
LUBRICANT CAPACITY
See also:
• FRONT FLOOR CONSOLE ASSEMBLY - LANCER