Home ReviewsRefund
Home/Mitsubishi/Lancer/Mitsubishi Lancer IX (2000-2007)/Repair manual/Mechanical - Hydraulic/Front Axle Hub Assembly - Except Evolution: Overview
Contents Wiring diagrams Section: Mechanical - Hydraulic All sections

Front Axle Hub Assembly - Except Evolution: Overview Mitsubishi Lancer IX

Mechanical - Hydraulic 1 illustration

Scheme 35

Scheme 35: WHEEL BEARING END PLAY CHECK
Scheme 35: WHEEL BEARING END PLAY CHECK
  1. Remove the disc brake caliper and suspend it with a wire.
  2. Remove the brake disc from the front hub.
  3. Attach a dial gauge as shown in the illustration, and then measure the end play while moving the hub in the axial direction. Limit: 0.05 mm (0.002 inch)
  4. If end play exceeds the limit, replace the front hub assembly.

More articles — Front Axle Hub Assembly - Except Evolution