Home ReviewsRefund
Home/Mitsubishi/Lancer/Mitsubishi Lancer IX (2000-2007)/Repair manual/Ignition Switch/steering Lock/Ignition Switch - Except Evolution: Removal & Installation
Contents Wiring diagrams Section: Ignition Switch/steering Lock All sections

Ignition Switch - Except Evolution: Removal & Installation Mitsubishi Lancer IX

Ignition Switch/steering Lock 2 illustrations

REMOVAL AND INSTALLATION

WARNINGBefore removal of the air bag module, refer to AIR BAG RESTRAINT SYSTEMS . When removing and installing the steering wheel, do not let it bump against the air bag module.

Scheme 2

Scheme 2
Scheme 2

Scheme 3

Scheme 3: << A >> STEERING LOCK CYLINDER REMOVAL
Scheme 3: << A >> STEERING LOCK CYLINDER REMOVAL
  1. Insert the key into steering lock cylinder to turn the ignition key to the "ACC" position.
  2. Insert the locking pin with a small cross-tipped screwdriver, etc., and remove the steering lock cylinder.

More articles — Ignition Switch - Except Evolution