>> A << ENGINE ASSEMBLY INSTALLATION Mitsubishi Lancer Evolution VIII

>> A << ENGINE ASSEMBLY INSTALLATION

Install the engine assembly, being careful not to pinch the cables, hoses or wiring harness connectors.

Scheme 486

Scheme 487

Scheme 488

1. Place a garage jack against the engine oil pan with a piece of wood in between, and install the engine front mounting bracket while adjusting the position of the engine.
2. Support the engine assembly with a garage jack.
3. Remove the chain block.
4. Use the following special tool during removal to support the engine. Set special tool MB991895 (refer to M/T: «TRANSAXLE ASSEMBLY»(/mitsubishi/lancer-evolution/viii-2003-2005/remont/manual-trans/#on-vehicle-service-evolution) or A/T: «TRANSAXLE ASSEMBLY»(/mitsubishi/lancer-evolution/viii-2003-2005/remont/automatic-trans/#diagnosis-24l-except-evolution-sportback) ). < Special tool MB991928 is used> Set special tool MB991928 (refer to M/T: «TRANSAXLE ASSEMBLY»(/mitsubishi/lancer-evolution/viii-2003-2005/remont/manual-trans/#on-vehicle-service-evolution) or A/T: «TRANSAXLE ASSEMBLY»(/mitsubishi/lancer-evolution/viii-2003-2005/remont/automatic-trans/#diagnosis-24l-except-evolution-sportback) ).

Scheme 489

1. Install the transaxle assembly (refer to M/T: «TRANSAXLE ASSEMBLY»(/mitsubishi/lancer-evolution/viii-2003-2005/remont/manual-trans/#on-vehicle-service-evolution) or A/T: «TRANSAXLE ASSEMBLY»(/mitsubishi/lancer-evolution/viii-2003-2005/remont/automatic-trans/#diagnosis-24l-except-evolution-sportback) ).
2. Remove from the car the two bolts, to assemble the radiator support upper insulator.