Headlining - Sportback — Body & Frame — Exterior/interior Trim — Mitsubishi Lancer Evolution VIII (2003-2005)

Headlining - Sportback Mitsubishi Lancer Evolution VIII

Scheme 2: REMOVAL AND INSTALLATION

<< A >> SUN VISOR HOLDER REMOVAL

Insert special tool MB990784 into side claws of the sun visor holder through the both sides of the sun visor holder to remove the hinges.

Scheme 3: << A >> SUN VISOR HOLDER REMOVAL

ITEM	SPECIFICATION
Front seatback frame bolt	44 ± 10 N.m (33 ± 7 ft-lb)
Front seatback pad and frame assembly bolt	44 ± 10 N.m (33 ± 7 ft-lb)
Front seat belt adjustable seat belt anchor	44 ± 10 N.m (33 ± 7 ft-lb)
Front seat belt bolt	44 ± 10 N.m (33 ± 7 ft-lb)
Front seat assembly bolt	44 ± 10 N.m (33 ± 7 ft-lb)
Front seat cushion frame bolt	12 ± 10 N.m (101 ± 23 in-lb)
Front seat assembly nut	30 ± 5 N.m (22 ± 4 ft-lb)
Front seat shaft bolt	9 ± 2 N.m (79 ± 18 in-lb)
Rear seatback assembly bolt	44 ± 10 N.m (33 ± 7 ft-lb)
Rear seatback assembly nut	30 ± 5 N.m (22 ± 4 ft-lb)
Rear seatback side assembly bolt	22 ± 4 N.m (16 ± 3 ft-lb)
Rear seat belt bolt	44 ± 10 N.m (33 ± 7 ft-lb)
Rear seat reclining cover screw	12 ± 2 N.m (102 ± 22 in-lb)
Rear center seat belt nut	44 ± 10 N.m (33 ± 7 ft-lb)

Fastener Tightening Specifications