MONITOR EXECUTION < DTC 46 (P0736) > Mitsubishi Lancer Evolution VIII

MONITOR EXECUTION < DTC 46 (P0736) >

1. Continuous

1. DTC 27, 28 (P0705): Transmission range switch malfunction
2. DTC 22 (P0715): Input shaft speed sensor malfunction
3. DTC 23 (P0720): Output shaft speed sensor malfunction

1. Input shaft speed sensor
2. Output shaft speed sensor
3. Transmission range switch
4. Torque converter clutch solenoid
5. Low-reverse solenoid
6. Underdrive solenoid
7. Second solenoid
8. Overdrive solenoid
9. A/T control relay

Scheme 1258

1. Engine speed: 450 r/min or more.
2. Output speed: 350 r/min or more.
3. Shift stage: reverse gear.
4. Input speed: more than 0 r/min.
5. Transmission fluid temperature sensor voltage: 4.5 volts or less.
6. Voltage of battery: 10 volts or more.
7. Transmission range switch rationality: only one signal.
8. Time after shift changing finish: 2 seconds or more.

1. Output speed: [(input speed + 200 r/min) / reverse gear ratio] or more. (4 seconds)
2. Output speed: [(input speed - 200 r/min) / reverse gear ratio] or less. (4 seconds)
3. If DTC 46 (P0736) is set consecutively four times, the transaxle is locked into 3rd gear as a fail-safe measure, and the "N" range light flashes once per second.