SPECIAL TOOLS
SPECIAL TOOLS CHART TOOL TOOL NUMBER AND NAME SUPERSESSION APPLICATION MB990784 Ornament remover General service tool Removal of cover. MB990803 Steering wheel puller General service tool Steering wheel removal A B C D E F G MB991958 A: MB991824 B: MB991827 C: MB991910 D: MB991911 E: MB991914 F: MB991825 G: MB9918260 MUT-III sub assembly A: Vehicle communication interface (V.C.I.) B: MUT-III USB cable C: MUT-III main harness A (Vehicles with CAN communication system) D: MUT-III main harness B (Vehicles without CAN communication system) E: MUT-III main harness C (for Daimler Chrysler models only F: MUT-III measurement adapter G: MUT-III trigger harness MB991824-KIT NOTE: G: MB991826 MUT-III Trigger Harness is not necessary when pushing V.C.I. ENTER key. SWS communication line check (ECU check and service data) CAUTION: MUT-III main harness B (MB991911) should be used. MUT-III main harness A and C should not be used for this vehicle. MB991865 Dummy resistor SRS air bag circuit check MB991866 Resistor harness MB991884 Resistor harness Resistor harness (for pre-tensioner) Seat belt with pre-tensioner circuit check MB991885 Adapter harness Pre-tensioner adapter harness Deployment of seat belt with pre-tensioner inside the vehicle Deployment of seat belt with pre-tensioner outside the vehicle A B C D MB991223 A: MB991219 B: MB991220 C: MB991221 D: MB991222 Harness set A: Test harness B: LED harness C: LED harness adaptor D: Probe General service tools Checking the continuity and measuring the voltage at the SRS-ECU harness connector MB992006 Extra fine probe General service tool Continuity check and voltage measurement at harness wire or connector for loose, corroded or damaged terminals, or terminals pushed back in the connector. MB686560 SRS air bag adapter harness General service tool Deployment of side-airbag module inside the vehicle Deployment of side-airbag module outside the vehicle
