Home ReviewsRefund
Home/Mitsubishi/Lancer Evolution/Mitsubishi Lancer Evolution IX (2005-2007)/Repair manual/Supplemental Restraint System - Lancer/SIDE IMPACT SENSOR
Contents Section: Supplemental Restraint System - Lancer All sections

SIDE IMPACT SENSOR Mitsubishi Lancer Evolution IX

Supplemental Restraint System - Lancer 1 illustration

SIDE IMPACT SENSOR

  1. Check that there is no bending or corrosion in the center pillar.
  2. Check that there is no denting, breakage or bending of the side impact sensor.
  3. Check that there is no clamping of the harness, connector damage or bent terminals.

Note. The illustration at left shows the side impact sensor (LH). The position of the side impact sensor (RH) is symmetrical to this.

Scheme 269

Scheme 269
Scheme 269