Contents Section: Engine Control Systems All sections

Specifications - Engine and Emission Controls - Lancer Mitsubishi Lancer Evolution IX

FASTENER TIGHTENING SPECIFICATIONS

ITEMSPECIFICATION
Engine control system
Accelerator cable attaching bolt5.0 +/- 1.0 N.m (44 +/- 9 in-lb)
Accelerator cable clump attaching bolt11 +/- 1 N.m (97 +/- 9 in-lb)
Accelerator pedal bracket installation nut12 +/- 2 N.m (102 +/- 22 in-lb)
Accelerator pedal position sensor assembly attaching bolt12 +/- 1 N.m (102 +/- 13 in-lb)
Accelerator pedal position sensor bracket attaching bolt5.0 +/- 1.0 N.m (44 +/- 9 in-lb)
Accelerator pedal position sensor bracket support bolt5.0 +/- 1.0 N.m (44 +/- 9 in-lb)
Auto-cruise control system
Auto-cruise control-ECU bracket attaching bolt4.9 +/- 0.9 N.m (43 +/- 8 in-lb)
Auto-cruise control-ECU installation nut4.9 +/- 0.9 N.m (43 +/- 8 in-lb)
ECM (M/T) or PCM (A/T) bracket bolt5.0 +/- 1.0 N.m (44 +/- 9 in-lb)
Vacuum pipe attaching bolt4.9 +/- 0.9 N.m (43 +/- 8 in-lb)
Vacuum pump bracket attaching bolt4.9 +/- 0.9 N.m (43 +/- 8 in-lb)
Emission control system
EGR valve bolt < 2.0L engine >22 +/- 4 N.m (16 +/- 3 ft-lb)
EGR valve bolt < 2.4L engine >24 +/- 3 N.m (18 +/- 2 ft-lb)
Catalytic converter < Vehicles for california >
Center exhaust pipe nut59 +/- 10 N.m (44 +/- 7 ft-lb)
Front exhaust pipe bolt (catalytic converter side)49 +/- 10 N.m (37 +/- 7 ft-lb)
Front exhaust pipe bolt (exhaust manifold side)50 +/- 5 N.m (37 +/- 4 ft-lb)
Heated oxygen sensor (front)45 +/- 5 N.m (34 +/- 3 ft-lb)

FASTENER TIGHTENING SPECIFICATIONS

SERVICE SPECIFICATIONS

ITEMSTANDARD VALUE
Engine control system
Accelerator cable free play mm (in)1.0 - 2.0 (0.04 - 0.08)
Curb idle speed r/min2.0L Engine700 +/- 100
2.4L Engine750 +/- 100
Emission control system
Purge flow cm 3 /s (SCFH) [at 80 - 95°C (176 - 205°F) with sudden revving]20 (2.5)
Evaporative emission purge solenoid coil resistance [at 20°C (68°F)] ohms22 - 26
EGR vacuum regulator solenoid valve coil resistance [at 20°C (68°F)] ohms2.0L Engine29 - 35
EGR valve (Stepper Motor) connector resistance [at 20°C (68°C)] ohms2.4L Engine20 - 24
Evaporative emission ventilation solenoid coil resistance [at 20°C (68°F)] ohms17 - 21

SERVICE SPECIFICATIONS