Home/Mitsubishi/Galant/Mitsubishi Galant VIII (1996-1999)/Repair manual/Removal & Installation/Engine Controls - Remove/install/overhaul: Specifications
Contents Wiring diagrams Section: Removal & Installation All sections

Engine Controls - Remove/install/overhaul: Specifications Mitsubishi Galant VIII

TORQUE SPECIFICATIONS

ApplicationsFt. Lbs. (N.m)
EGR Valve16 (22)
Engine Coolant Temperature Sensor22 (30)
Exhaust Manifold-To-Engine Nuts18-21 (24-29)
Exhaust Pipe Bolts21-36 (29-49)
Fuel Filter Line27 (36)
Fuel Tank Drain Plug11-18 (15-24)
Fuel Tank Nuts15-21 (20-29)
Heated Oxygen Sensor
Front29-33 (39-44)
Rear15-29 (20-39)
Intake Manifold Plenum Bolt/Nut13 (18)
Knock Sensor15-18 (20-24)
Oil Return Pipe-To-Engine10-14 (14-19)
Oil Supply Pipe-To-Engine Nut14 (19)
Plenum-To-Intake Manifold Bolts11-15 (15-20)
Throttle Body14 (19)
INCH Lbs. (N.m)
Camshaft Position Sensor80 (9)
Crankshaft Position Sensor80 (9)
Distributor Hold-Down Bolt106 (12)
Engine Cover22-40 (2.5-4.5)
Fuel Pressure Regulator80 (9)
Fuel Pump Nuts22 (2.5)
Fuel Rail Bolts80-106 (9.0-12.0)
Heat Protector Bolts106-133 (12.0-15.0)
TP Sensor Screws13-22 (1.5-2.5)
Wastegate Actuator Bolts80-106 (9.0-12.0)

TORQUE SPECIFICATIONS