LUBRICATION SPECIFICATIONS
| Material | Condition | Specification |
|---|
| Engine Oil (1) | Ambient Temperature Less Than 0°F (-18°C) To 100°F (38°C) | SAE 5W-30 |
| Engine Oil (1) | Ambient Temperature Above 0°F (-18°C) To Over 100°F (38°C) | SAE 10W-30 |
| Power Steering Fluid | All | Automatic Transmission Fluid DEXRON II |
| Engine Coolant | All | 50/50 Mixture Of Distilled Water & Ethylene Glycol |
| Manual Transaxle | All | API Classification GL-4 SAE 75W-85W Or 75W-90 |
| Automatic Transaxle | All | DIAMOND ATF SP II Or Equivalent |
| Brake Fluid | All | Conforming To DOT 3 Or DOT 4 |
| Clutch Fluid | All | Conforming To DOT 3 Or DOT 4 |
| Transaxle Linkage, Parking BrakeCable Mechan- ism, Hood Lock & Hook,Door Latches Seat Adjusters | All | Multipurpose Grease NLGI Grade 2 |
| Door Hinges, Deck Lid Hinges | All | Engine Oil |
| A/C Refrigerant | All | HFC-134a |
| (1) SAE 5W-30 engine oil is preferred. SAE 10W-30 may be used if the Ambient Temperature is above 0° F (-18° C). |
| (1) | SAE 5W-30 engine oil is preferred. SAE 10W-30 may be used if the Ambient Temperature is above 0° F (-18° C). |
LUBRICATION SPECIFICATIONS
FLUID CAPACITIES
| Item | Condition | Specification |
|---|
| Engine Oil | Oil Pan | 4.2 Qts. (4.0L) |
| Engine Oil | Oil Filter | 0.32 Qts. (0.3L) |
| Engine Coolant | Drained; With Reserve Tank | 8.1 Qts. (6.7L) |
| Manual Transaxle | Drained | 2.1 Qts. (2.0L) |
| Automatic Transaxle | 2.4L: Drained | 6.3 Qts. (6.0L) |
| Automatic Transaxle | 2.5L: Drained | 9.1 Qts. (8.6L) |
| Power Steering | Drained | 1.0 Qts. (0.9L) |
| A/C Refrigerant | Drained | 680 g |
| Fuel Tank | Capacity | 16.9 gal (64L) |
| (1) Capacities are recommended or calculated levels. Always use dipstick to measure level. |
| (1) | Capacities are recommended or calculated levels. Always use dipstick to measure level. |
TORQUE SPECIFICATIONS
| Wheel Type | Ft. Lbs. (N.m.) |
|---|
| Steel & Aluminum | 65-80 (90-110) |
BATTERY SPECIFICATIONS
| CAUTION | When battery is disconnected, vehicles equipped with computers may lose memory data. When battery power is restored, driveability problems may exist on some vehicles. These vehicles may require a relearn procedure. See COMPUTER RELEARN PROCEDURES article in the GENERAL INFORMATION Section. |
