SERVICE SPECIFICATIONS
| ITEMS | STANDARD VALUE | LIMIT | |
|---|---|---|---|
| Generator | |||
| Regulated voltage (Ambient temperature at voltage regulator) | 20°C (- 4°F) | 14.2-15.4 | |
| 20°C (68°F) | 13.9-14.9 | ||
| 60°C (140°F) | 13.4-14.6 | ||
| 80°C (176°F) | 13.1-14.5 | ||
| Generator output line voltage drop (at 30 A) V | Maximum 0.3 | ||
| Output current | 70 % of normal output current | ||
| Field coil resistance ohms | Approximately 2-5 | ||
| Brush protrusion length mm (in) | Minimum 2 (0.08) | ||
| Starter motor | |||
| Free running characteristics | Terminal voltage V | 11 | |
| Current A | 90 | ||
| Speed r/min | 2,000 or more | ||
| Pinion gap mm (in) | 0.5-2.0 (0.02-0.07) | ||
| Commutator run-out mm (in) | 0.05 (0.002) | Minimum 0.1 (0.004) | |
| Commutator diameter mm (in) | 29.4 (1.16) | Minimum 28.8 (1.13) | |
| Undercut depth mm (in) | 0.5 (0.02) | Minimum 0.2 (0.008) | |
| Ignition parts | |||
| Spark plug gap mm (in) | 2.4L Engine | 0.7-0.8 (0.028-0.031) | 1.2 (0.047) |
| 3.8L Engine | 0.7-0.8 (0.028-0.031) | 0.95 (0.037) | |
SERVICE SPECIFICATIONS (2.4L & 3.8L)