Home/Mitsubishi/Eclipse/Mitsubishi Eclipse IV рестайлинг (2008-2011)/Repair manual/Automatic Trans/Automatic Transaxle Overhaul (F5A5A): Adjustments

Contents

Section: Automatic Trans

All sections

Automatic Transaxle Overhaul (F5A5A): Adjustments Mitsubishi Eclipse IV рестайлинг

Automatic Trans ~190 words

THRUST WASHER (FOR ADJUSTMENT OF INPUT SHAFT END PLAY)

THICKNESS mm (in)	IDENTIFICATION SYMBOL
1.8 (0.071)	18
2.0 (0.079)	20
2.2 (0.087)	22
2.4 (0.094)	24
2.6 (0.102)	26
2.8 (0.110)	28

THRUST WASHER SPECIFICATIONS

SNAP RING (FOR ADJUSTMENT OF UNDERDRIVE CLUTCH AND OVERDRIVE CLUTCH END PLAY)

THICKNESS mm (in)	IDENTIFICATION SYMBOL
1.6 (0.063)	Brown
1.7 (0.067)	None
1.8 (0.071)	Blue
1.9 (0.075)	Brown
2.0 (0.079)	None
2.1 (0.083)	Blue
2.2 (0.087)	Brown
2.3 (0.091)	None
2.4 (0.094)	Blue
2.5 (0.098)	Brown
2.6 (0.102)	None
2.7 (0.106)	Blue
2.8 (0.110)	Brown
2.9 (0.114)	None
3.0 (0.118)	Blue

SNAP RING (UNDERDRIVE AND OVERDRIVE CLUTCH END PLAY) SPECIFICATIONS

SNAP RING (FOR ADJUSTMENT OF LOW-REVERSE BRAKE AND SECOND BRAKE REACTION PLATES END PLAY)

THICKNESS mm (in)	IDENTIFICATION SYMBOL
2.2 (0.087)	None
2.3 (0.091)	Blue
2.4 (0.094)	Brown
2.5 (0.098)	None

SNAP RING (LOW-REVERSE AND SECOND BRAKE REACTION PLATES END PLAY) SPECIFICATIONS

PRESSURE PLATE (FOR ADJUSTMENT OF LOW-REVERSE BRAKE AND SECOND BRAKE END PLAY)

THICKNESS mm (in)	IDENTIFICATION SYMBOL
1.6 (0.063)	F
1.8 (0.071)	E
2.0 (0.079)	D
2.2 (0.087)	C
2.4 (0.094)	B
2.6 (0.102)	A
2.8 (0.110)	0
3.0 (0.118)	1

PRESSURE PLATE (LOW-REVERSE AND SECOND BRAKE END PLAY) SPECIFICATIONS

SNAP RING (FOR ADJUSTMENT OF REVERSE CLUTCH END PLAY)

THICKNESS mm (in)	IDENTIFICATION SYMBOL
1.6 (0.063)	None
1.7 (0.067)	Blue
1.8 (0.071)	Brown
1.9 (0.075)	None
2.0 (0.079)	Blue
2.1 (0.083)	Brown
2.2 (0.087)	None
2.3 (0.091)	Blue
2.4 (0.094)	Brown
2.5 (0.098)	None
2.6 (0.102)	Blue
2.7 (0.106)	Brown
2.8 (0.110)	None

SNAP RING (REVERSE CLUTCH END PLAY) SPECIFICATIONS

SNAP RING (FOR ADJUSTMENT OF REVERSE CLUTCH AND OVERDRIVE CLUTCH SPRING RETAINER END PLAYS)

THICKNESS mm (in)	IDENTIFICATION SYMBOL
1.48 (0.0583)	Brown
1.53 (0.0602)	None
1.58 (0.0622)	Blue
1.63 (0.0642)	Brown

SNAP RING (REVERSE CLUTCH AND OVERDRIVE CLUTCH SPRING RETAINER END PLAYS) SPECIFICATIONS

THRUST RACE (FOR ADJUSTMENT OF UNDERDRIVE SUN GEAR END PLAY)

THICKNESS mm (in)	IDENTIFICATION SYMBOL
1.6 (0.063)
1.7 (0.067)
1.8 (0.071)
1.9 (0.075)
2.0 (0.079)
2.1 (0.083)
2.2 (0.087)
2.3 (0.091)
2.4 (0.094)
2.5 (0.098)
2.6 (0.102)

THRUST RACE (UNDERDRIVE SUN GEAR END PLAY) SPECIFICATIONS

SPACER (FOR ADJUSTMENT OF DIRECT CLUTCH END PLAY)

THICKNESS mm (in)	IDENTIFICATION SYMBOL
1.9 (0.075)	Brown
2.0 (0.079)	None
2.1 (0.083)	Blue
2.2 (0.087)	Brown
2.3 (0.091)	None
2.4 (0.094)	Blue
2.5 (0.098)	Brown
2.6 (0.102)	None
2.7 (0.106)	Blue
2.8 (0.110)	Brown
2.9 (0.114)	None
3.0 (0.118)	Blue

SPACER (DIRECT CLUTCH END PLAY) SPECIFICATIONS

SPACER (FOR ADJUSTMENT OF DIFFERENTIAL CASE PRELOAD)

THICKNESS mm (in)	IDENTIFICATION SYMBOL
0.65 (0.0256)	65
0.68 (0.0268)	68
0.71 (0.0280)	71
0.74 (0.0291)	74
0.77 (0.0303)	77
0.80 (0.0315)	80
0.83 (0.0327)	83
0.86 (0.0339)	86
0.89 (0.0350)	89
0.92 (0.0362)	92
0.95 (0.0374)	95
0.98 (0.0386)	98
1.01 (0.0398)	01
1.04 (0.0409)	04
1.07 (0.0421)	07
1.10 (0.0433)	10
1.13 (0.0445)	13
1.16 (0.0457)	16
1.19 (0.0469)	19
1.22 (0.0480)	22
1.25 (0.0492)	25
1.28 (0.0504)	28
1.31 (0.0516)	31
1.34 (0.0528)	34

SPACER (DIFFERENTIAL CASE PRELOAD) SPECIFICATIONS

SPACER (FOR ADJUSTMENT OF BACKLASH BETWEEN DIFFERENTIAL SIDE GEAR AND PINION)

THICKNESS mm (in)	IDENTIFICATION SYMBOL
0.56-0.64 (0.0220-0.0252)
0.66-0.74 (0.0260-0.0291)
0.76-0.84 (0.0299-0.0331)
0.86-0.94 (0.0339-0.0370)
0.96-1.04 (0.0378-0.0409)
1.06 - 1.14 (0.0417 - 0.0449)

SPACER (BACKLASH BETWEEN DIFFERENTIAL SIDE GEAR AND PINION) SPECIFICATIONS