FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| Air bag module(s) and clock spring | |
| Steering wheel dynamic damper mounting bolt | 3.9 +/- 0.9 N.m (35 +/- 8 in-lb) |
| Steering wheel nut | 41 +/- 8 N.m (30 +/- 6 ft-lb) |
| Clock spring screw | 0.69 +/- 0.15 N.m (6 +/- 1 in-lb) |
| Torx screw | 9.0 +/- 2.0 N.m (80 +/- 17 in-lb) |
| Front impact sensor | |
| Front impact sensor nut | 5.0 +/- 1.0 N.m (44 +/- 9 in-lb) |
| Seat belts with pre-tensioner | |
| Seat belt lower anchor bolt | 44 +/- 10 N.m (33 +/- 7 ft-lb) |
| Final anchor bracket | 44 +/- 10 N.m (33 +/- 7 ft-lb) |
| Seat belt shoulder anchor bolt | 44 +/- 10 N.m (33 +/- 7 ft-lb) |
| Seat belt with pre-tensioner mounting bolt | 44 +/- 10 N.m (33 +/- 7 ft-lb) |
| Seat slide sensor | |
| Seat slide sensor mounting bolt | 5.0 +/- 1.0 N.m (44 +/- 9 in-lb) |
| Side impact sensor | |
| Side impact sensor nut | 5.0 +/- 1.0 N.m (44+/- 9 in-lb) |
| SRS control unit (SRS-ECU) | |
| SRS-ECU mounting bolt | 5.0 +/- 1.0 N.m (44 +/- 9 in-lb) |
FASTENER TIGHTENING SPECIFICATIONS
SERVICE SPECIFICATIONS
| ITEM | TESTER CONNECTION | STANDARD VALUE | SPECIFIED CONDITION |
|---|---|---|---|
| Fastened seat belt | 3-5 | 820 +/- 20 ohms | |
| 3-Ground | No continuity | ||
| 5-Ground | No continuity | ||
| 4-5 | Less than 2 ohms | ||
| Unfastened seat belt | 4-5 | 820 +/- ohms | |
| 4-Ground | No continuity | ||
| 5-Ground | No continuity | ||
| 3-5 | Less than 2 ohms | ||
DRIVER'S SEAT BELT SWITCH SPECIFICATIONS
See also:
• BATTERY TEST