< 2.4L ENGINE >
| ITEM | SPECIFICATION |
|---|---|
| Charging system | |
| Connector bracket bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Generator bolt | 49 +/- 9 N.m (36 +/- 7 ft-lb) |
| Generator cover bolt | 5.9 +/- 1.0 N.m (52 +/- 9 in-lb) |
| Generator mounting bracket bolt | 49 +/- 9 N.m (36 +/- 7 ft-lb) |
| Generator nut | 44 +/- 10 N.m (33 +/- 7 ft-lb) |
| Generator terminal nut | 12 +/- 2 N.m (102 +/- 22 in-lb) |
| Harness bracket bolt | 14 +/- 1 N.m (120 +/- 13 in-lb) |
| Ignition system | |
| Camshaft position sensor bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Crankshaft position sensor bolt | 8.5 +/- 0.5 N.m (76 +/- 4 in-lb) |
| Ignition coil bolt | 10 +/- 2 N.m (89 +/- 17 in-lb) |
| Intake manifold stay bolt | 31 +/- 3 N.m (23 +/- 2 ft-lb) |
| Knock sensor | 23 +/- 2 N.m (17 +/- 1 ft-lb) |
| Knock sensor connector bracket bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Spark plug | 25 +/- 4 N.m (18 +/- 3 ft-lb) |
| Starting system | |
| ATF warmer (transmission fluid cooler) bracket bolt < A/T > | 23 +/- 3 N.m (17 +/- 2 ft-lb) |
| Clutch release cylinder bolt | 18 +/- 3 N.m (13 +/- 2 ft-lb) |
| Starter bolt | 30 +/- 3 N.m (23 +/- 2 ft-lb) |
| Starter cover bolt | 9.0 +/- 2.0 N.m (80 +/- 17 in-lb) |
| Starter cover bracket bolt | 49 +/- 9 N.m (36 +/- 7 ft-lb) |
| Starter terminal nut | 12 +/- 2 N.m (102 +/- 22 in-lb) |
FASTENER TIGHTENING SPECIFICATIONS (2.4L ENGINE)
< 3.8L ENGINE >
| ITEM | SPECIFICATION |
|---|---|
| Charging system | |
| Control wiring harness nut | 12 +/- 2 N.m (102 +/- 22 in-lb) |
| Engine oil dipstick and dipstick guide bolt | 14 +/- 1 N.m (120 +/- 13 in-lb) |
| Generator bolt | 49 +/- 9 N.m (36 +/- 7 ft-lb) |
| Generator bracket bolt | 49 +/- 9 N.m (36 +/- 7 ft-lb) |
| Harness bracket bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Ignition system | |
| Camshaft position sensor bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Crankshaft position sensor bolt | 8.5 +/- 0.5 N.m (76 +/- 4 in-lb) |
| Crankshaft position sensor clamp bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Crankshaft position sensor clip bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Ignition coil bolt | 10 +/- 2 N.m (89 +/- 17 in-lb) |
| Knock sensor | 23 +/- 2 N.m (17 +/- 1 ft-lb) |
| Knock sensor clip bolt | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Spark plug | 25 +/- 4 N.m (18 +/- 3 ft-lb) |
| Starting system | |
| Starter bolt | 30 +/- 3 N.m (23 +/- 2 ft-lb) |
| Starter cover bolt | 4.9 +/- 1.0 N.m (44 +/- 8 in-lb) |
| Starter cover nut | 4.9 +/- 1.0 N.m (44 +/- 8 in-lb) |
| Starter terminal nut | 12 +/- 2 N.m (102 +/- 22 in-lb) |
FASTENER TIGHTENING SPECIFICATIONS (3.8L ENGINE)
| ITEMS | SPECIFICATIONS |
|---|---|
| Generator | |
| Type | Positive battery positive voltage sensing |
| Identification number | A3TG2192ZC |
| Part No. | MN183451 |
| Rated output V/A | 12/110 |
| Voltage regulator | Electronic built-in type |
| Starter Motor | |
| Type | Reduction drive with planetary gear |
| Identification number | M0T20672ZC |
| Part No. | 1810A001 |
| Rated output kW/V | 1.4/12 |
| No. of pinion teeth | 8 |
| Ignition Coil | |
| Type | Molded 4 coil |
| Spark plugs | |
| NGK | LZFR6AI |
GENERAL SPECIFICATIONS (2.4L ENGINE)
| ITEMS | SPECIFICATIONS |
|---|---|
| Generator | |
| Type | Positive battery positive voltage sensing |
| Identification number | A3TG2491ZC |
| Part No. | MN176256 |
| Rated output V/A | 12/110 |
| Voltage regulator | Electronic built-in type |
| Starter Motor | |
| Type | Reduction drive with planetary gear |
| Identification number | M0T20571ZC |
| Part No. | MR994145 |
| Rated output kW/V | 1.4/12 |
| Number of pinion teeth | 8 |
| Ignition Coil | |
| Type | Molded 6 coil |
| Spark Plugs | |
| NGK | IFR6B-K |
GENERAL SPECIFICATIONS (3.8L ENGINE)