Home/Mitsubishi/Eclipse/Mitsubishi Eclipse II (1994-1999)/Repair manual/Removal & Installation/Engine Controls - Remove/install/overhaul - 2.0L Turbo: Spe…
Contents Wiring diagrams Section: Removal & Installation All sections

Engine Controls - Remove/install/overhaul - 2.0L Turbo: Specifications Mitsubishi Eclipse II

TORQUE SPECIFICATIONS

ApplicationsFt. Lbs. (N.m)
Engine Coolant Temperature Sensor21 (29)
Exhaust Manifold-To-Engine Nuts18-21 (24-29)
Exhaust Manifold-To-Turbocharger Bolts40-47 (54-64)
Exhaust Pipe Bolts21-29 (29-39)
Fuel Tank Drain Plug11-18 (15-24)
Fuel Tank Nuts15-21 (20-29)
Heated Oxygen Sensor29-36 (39-49)
Knock Sensor15-18 (20-24)
Oil Pipe-To-Engine10-14 (14-19)
Plenum-To-Intake Manifold Bolts11-15 (15-20)
Water Pipe-To-Turbocharger25-36 (34-49)
INCH Lbs. (N.m)
Camshaft Position Sensor80 (9)
Crankshaft Position Sensor80 (9)
Distributor Hold-Down Bolt106 (12)
Fuel Pump Nuts22 (2.5)
Fuel Rail Bolts80-106 (9.0-12.0)
Heat Protector Bolts106-133 (12.0-15.0)
IAC Switch Screws22-40 (2.5-4.5)
TP Sensor Screws13-22 (1.5-2.5)
Wastegate Actuator Bolts80-106 (9.0-12.0)

TORQUE SPECIFICATIONS