GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Magnetic Clutch | |
| Air gap between pulley and clutch plate | 0.35-0.65 mm (0.014-0.026 in) |
GENERAL SPECIFICATIONS
TORQUE SPECIFICATIONS TABLE
| Description | Nm |
|---|---|
| A/C compressor bolts | 25 |
| A/C compressor fitting nuts (suction and discharge) | 15 |
| A/C compressor mounting stud | 9 |
| A/C compressor nut | 25 |
| A/C compressor pressure relief valve | 10 |
| A/C clutch disc and hub bolt | 14 |
| Auxiliary evaporator inlet line fitting nut | 15 |
| Auxiliary evaporator outlet line fitting nut | 15 |
| Condenser bolts | 6 |
| Condenser fitting nuts (inlet and outlet) | 15 |
| Cross-vehicle beam nuts | 30 |
| Evaporator inlet line fitting nut | 15 |
| Evaporator outlet line fitting nut | 15 |
| Heater core and evaporator core housing bolts | 9 |
| High-pressure Schrader-type valve | 2.5 |
| High-pressure service gauge port valve cap | 0.8 |
| Low-pressure Schrader-type valve | 1.8 |
| Low-pressure service gauge port valve cap | 0.8 |
| Receiver/drier outlet fitting nut | 15 |
| Roll restrictor bracket bolt | 48 |
| Thermostatic expansion valve (TXV) bolts | 8 |
| TXV fitting bolt | 8 |
| TXV manifold and tube bracket bolt | 9 |
TORQUE SPECIFICATIONS TABLE