Emission Control System: Removal & Installation Mercury Sable V

REMOVAL AND INSTALLATION

Early build engines

1. Disconnect the PCV valve electrical connector.
2. Disconnect the crankcase ventilation tube from the PCV valve.
3. Rotate the PCV valve counterclockwise and remove from the valve cover. Discard the PCV valve.
4. To install, reverse the removal procedure.

1. Disconnect the PCV heater element electrical connector.
2. Release the spring tension clamp and remove the crankcase ventilation tube from the PCV heater element.
3. Remove the 2 PCV heater element retainer screws. To install, tighten to 6 Nm (53 lb-in).
4. Remove the PCV heater element from the intake manifold.
5. To install, reverse the removal procedure.