TORQUE SPECIFICATIONS (CONTINENTAL, SABLE & TAURUS)
| Application | Ft. Lbs. (N.m) |
|---|
| Lower Control Arm-To-Knuckle | 40-53 (54-72) |
| Oil Cooler Line Nut At Radiator | 8-12 (11-16) |
| Oil Cooler Line Push Connector At Transaxle | 18-23 (24-31) |
| Rod-To-Knuckle Nut | (1) 23-35 (31-47) |
| Stabilizer U-Clamp Bolts | 23-29 (31-39) |
| Torque Converter-To-Flexplate Nuts | 23-39 (31-53) |
| Transaxle-To-Engine Mounting Bolts | 41-50 (56-68) |
| Wheel Lug Nuts | 85-105 (115-142) |
| INCH Lbs. (N.m) |
| Oil Pan Bolts | 96-132 (10.8-14.9) |
| (1) Tighten to minimum torque; then tighten to nearest cotter pin slot. |
| (1) | Tighten to minimum torque; then tighten to nearest cotter pin slot. |
TORQUE SPECIFICATIONS (CONTINENTAL, SABLE & TAURUS)
TORQUE SPECIFICATIONS (WINDSTAR)
| Application | Ft. Lbs. (N.m) |
|---|
| Engine Mount Through-Bolt | 55-75 (76-102) |
| Engine Mount-To-Subframe Bolt | 60-85 (81-115) |
| Starter Bolt | 16-21 (22-28) |
| Subframe-To-Body Bolt | 55-75 (76-102) |
| Torque Converter-To-Flexplate Nut | 20-34 (27-46) |
| Rear Engine Mount-To-Transaxle | 39-53 (53-72) |
| Transaxle-To-Engine Bolt | 39-53 (53-72) |
TORQUE SPECIFICATIONS (WINDSTAR)
