Special Tool(s)
SPECIAL TOOL SPECIFICATIONS Worldwide Diagnostic System (WDS) Vehicle Communication Module (VCM) with appropriate adapters, or equivalent diagnostic tool 73 III Automotive Meter 105-R0057 or equivalent Flex Probe Kit 105-R025B
Scheme 18
Scheme 19
Scheme 20
Refer to SYSTEM WIRING DIAGRAMS (Freestar) or SYSTEM WIRING DIAGRAMS (Monterey) for schematic and connector information.
Refer to COMPONENT TESTING .
The steering column switches include the ignition switch (electrical) and the multifunction switch (headlamp dimmer/flash to pass, turn signal, and windshield wiper). The ignition switch is controlled by the lock cylinder key. When the lock cylinder key is turned to a selected position, a mechanical linkage allows the ignition switch to send voltage through the smart junction box (SJB) to specific components. The multifunction switch controls the various components electrically. The headlamp dimmer/flash to pass switch (part of the multifunction switch) sends voltage to the headlamps. The flash to pass switch is a momentary switch used to send voltage only to the high beam headlamps. The headlamp dimmer is used to switch voltages between the low and high beam headlamps while the headlamps are on. The turn signal switch lever (part of the multifunction switch) operates the left and right turn signals. When the desired turn signal is pressed, voltage passes through the SJB to the selected turn signal, causing the turn signals to flash. The windshield wiper switch (part of the multifunction switch) uses a ground signal to activate the various wiper modes.