GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Brake Pads | |
| Brake pad minimum thickness | 3.0 mm (0.118 inch) |
| Brake pad maximum thickness variation (pad-to-pad) | 2.0 mm (0.079 inch) |
| Brake pad maximum taper wear (in any direction) | 3.0 mm (0.118 inch) |
| Brake Disc | |
| Front brake disc minimum thickness | 26.5 mm (1.04 inch) |
| Rear brake disc minimum thickness | 10.0 mm (0.394 inch) |
| Minimum thickness to machine front brake disc | 27.1 mm (1.07 inch) |
| Minimum thickness to machine rear brake disc | 10.6 mm (0.417 inch) |
| Lubricant | |
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1 (Canada CPM-1) | ESA-M6C25-A |
| High Temperature Nickel Anti-Seize Lubricant XL-2 (Canada CXG-2-B) | ESE-M12A4-A |
| Brake Parts Cleaner PM-4 | |
GENERAL SPECIFICATIONS
TORQUE SPECIFICATIONS
| Description | Nm |
|---|---|
| Brake master cylinder tube fitting | 18 |
| Front caliper bleeder screw | 12 |
| Rear caliper bleeder screw | 10 |
TORQUE SPECIFICATIONS
The brake system has the following components
- a fixed brake pedal
- an optional power adjustable brake pedal with memory function
- vacuum-assisted power brake booster
- digital split hydraulic system
- front disc brakes uses a dual piston brake caliper and disc system
- rear disc brakes with an integral parking brake, uses a single piston brake caliper and disc system
- 4-wheel anti-lock brake system (4WABS). For additional information, refer to «ANTI-LOCK CONTROL»(ref-233026) .