Home ReviewsRefund
Home/Mercury/Mariner/Mercury Mariner II рестайлинг (2011-2011)/Repair manual/Engine Mechanical - 2.5l (except Hybrid)/Disassembly
Contents Section: Engine Mechanical - 2.5l (except Hybrid) All sections

Disassembly Mercury Mariner II рестайлинг

Engine Mechanical - 2.5l (except Hybrid) 1 illustration ~136 words

Disassembly

Note. If the components are to be reinstalled, they must be installed in the same positions. Mark the components removed for locations.

Scheme 318

Scheme 318: Disassembly
Scheme 318: Disassembly
  1. Remove the 4 bolts and the coolant outlet. Discard the gasket.
  2. Remove the 2 bolts and the EGR valve. Discard the gasket.
  3. Remove the Cylinder Head Temperature (CHT) sensor.
  4. Remove the spark plugs.
  5. Using the Valve Spring Compressors, compress the valve springs and remove the valve collets, valve spring retainers and the valve springs.
  6. Inspect the components, if necessary. For additional information, refer to «ENGINE MECHANICAL SYSTEM - GENERAL INFORMATION»(/mercury/mariner/ii-2011-2011/remont/mechanical/#engine-mechanical-system-general-information) article.
  7. Remove the valves.
  8. Using the Valve Stem Oil Seal Remover and Slide Hammer, remove and discard the valve seals.
  9. Inspect the valves. For additional information, refer to «ENGINE MECHANICAL SYSTEM - GENERAL INFORMATION»(/mercury/mariner/ii-2011-2011/remont/mechanical/#engine-mechanical-system-general-information) article. Install new parts, as necessary.