Home/Mercury/Mariner/Mercury Mariner II (2007-2010)/Repair manual/Frames, Subframes & Crossmembers/Uni-Body, Subframe and Mounting System: Specifications
Contents Wiring diagrams Section: Frames, Subframes & Crossmembers All sections

Uni-Body, Subframe and Mounting System: Specifications Mercury Mariner II

TORQUE SPECIFICATIONS

DescriptionNm
Cap strap bolts23
Engine support crossmember bolts90
Engine support crossmember front insulator bolt115
Engine support crossmember nut175
Front driveshaft-to-transfer case bolts37
Front subframe rear bolts175
Front subframe nuts150
Lateral support crossmember bolts115
Lower control arm ball joint pinch nuts63
Outer tie-rod nuts55
Power steering coupler bolt25
Rear control arm bolts115
Rear engine mount bracket nuts/bolt (Escape Hybrid)90
Rear subframe rear bolts115
Rear subframe front bolts103
Rear transaxle support isolator through bolt115
Stabilizer bar link nuts55

TORQUE SPECIFICATIONS

See also:
JACKING AND LIFTING