REMOVAL & INSTALLATION
| CAUTION | When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery. |
Disconnect negative battery cable. Remove driver's side door trim panel. Remove 2 screws retaining relay to door. Disconnect harness connector and remove relay. To install, reverse removal procedure.
Disconnect negative battery cable. Ensure window is in fully closed position. Remove door trim panel. Remove door speaker(s) and disconnect speaker harness connector. Peel back door panel watershield. Disconnect window motor harness connector. Remove 3 window motor securing bolts and remove window motor. To install, reverse removal procedure.
