Screw Installation Note
| CAUTION | If an undesigned screw is used, the inside of the upper module could be damaged. When installing the module, be sure to use a designated screw (red) |
Scheme 28
- Disconnect the battery cables. See «BATTERY DISCONNECT»(ref-221834-S42533501902006022600000) .
- Remove the audio unit. For additional information, see «AUDIO UNIT»(ref-221998-S20001787162006022600000) .
- Remove in the order indicated in the table.
- To install, reverse the removal procedure.
Scheme 29
- Insert the SST into the service holes on the bottom surface of the lower module.
- To remove the cover, push the SST in the direction shown by the arrow.
| CAUTION | If an undesigned screw is used, the Inside of the upper module could be damaged. When installing the module, be sure to use a designated screw (red) |