Home ReviewsRefund
Home/Mazda/RX-8/Mazda RX-8 I рестайлинг (2008-2012)/Repair manual/Wiper/washer Systems/On-Board Diagnostic (Auto Light Control Module & Wiper Cont…
Contents Section: Wiper/washer Systems All sections

On-Board Diagnostic (Auto Light Control Module & Wiper Control Module): Overview Mazda RX-8 I рестайлинг

Wiper/washer Systems 1 illustration ~113 words

Scheme 38

Scheme 38: DTC INSPECTION [AUTO LIGHT/WIPER CONTROL MODULE]
Scheme 38: DTC INSPECTION [AUTO LIGHT/WIPER CONTROL MODULE]
  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS. When using the IDS (laptop PC) Select "Self Test". Select "Modules". Select "LCM". When using the PDS (Pocket PC) Select "Module Tests". Select "LCM". Select "Self Test".
  3. Verify the DTC according to the directions on the screen. If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.
  4. After completion of repairs, clear all DTCs stored in the auto light/wiper control module. (See «CLEARING DTC [AUTO LIGHT/WIPER CONTROL MODULE]»(ref-367713-S02764354142010072700000).)

More articles — On-Board Diagnostic (Auto Light Control Module & Wiper Control Module)