Home ReviewsRefund
Home/Mazda/MX-5/Mazda MX-5 NC рестайлинг (2008-2015)/Repair manual/Mechanical - Hydraulic/Conventional Brake System: Adjustments
Contents Section: Mechanical - Hydraulic All sections

Conventional Brake System: Adjustments Mazda MX-5 NC рестайлинг

Mechanical - Hydraulic 1 illustration

Brake Pedal Height Adjustment

CAUTIONThe brake switch may not operate normally after adjusting the pedal height. Whenever adjusting the pedal height, replace the brake switch with a new one. The interlock cable may not operate normally after adjusting the pedal height. Whenever adjusting the pedal height, refer to the interlock cable installation note. (See INTERLOCK CABLE INSTALLATION NOTE ).

Scheme 11

Scheme 11
Scheme 11
  1. Loosen the locknut and turn the push rod to adjust the pedal height.
  2. Tighten the locknut. Tightening torque 20.4-30.6 N.m {2.09-3.12 Kgf.m, 15.0-22.5 ft.lbf}
  3. After adjustment, inspect the pedal play.

More articles — Conventional Brake System