Cruise Control System: Removal & Installation Mazda MX-5 NB рестайлинг

CRUISE CONTROL SWITCH REMOVAL/INSTALLATION

Note. The cruise control switch is together with the wiper lever.

1. Disconnect the negative battery cable.
2. Remove the wiper lever from the combination switch. (See «COMBINATION SWITCH DISASSEMBLY/ASSEMBLY»(ref-194478-S19269187672005092800000) .)
3. Install in the reverse order of removal.

Scheme 29

Scheme 30

1. Remove the combination switch. (See «COMBINATION SWITCH REMOVAL/INSTALLATION»(ref-194478-S32929465782005092800000) .)
2. Measure the resistance between the cruise control switch terminals using an ohmmeter. If not as specified, replace the wiper lever.