WHEELS AND TIRES REMOVALS/INSTALLATION
- The removal and installation procedures for the wheels and tires are not mentioned in this section. When a wheel is removed, tighten it to 107.8-147.0 N.m {11.00-14.98 kgf.m, 79.6-108.4 ft.lbf}.
POWER STEERING COMPONENTS REMOVAL/INSTALLATION
- If any power steering fluid line has been disconnected anytime during the procedure, add ATF M- III ), or equivalent (e.g. Dexron(R) III ), bleed the fluid lines, and inspect for leakage after the procedure has been completed.