Security System and Locks System: Wiring Mazda MPV II рестайлинг

POWER DOOR LOCK SYSTEM WIRING DIAGRAM

For power door lock system wiring diagram, see POWER DOOR LOCKS .

Scheme 93

1. Disconnect the negative battery cable.
2. Remove the passenger-side front side trim. (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
3. Disconnect the door lock control module connector.
4. Remove the nut.
5. Remove the door lock control module.
6. Install in the reverse order of removal.

KEYLESS ENTRY SYSTEM WIRING DIAGRAM

For keyless entry system wiring diagram, see POWER DOOR LOCKS and ANTI-THEFT .

Scheme 94

Scheme 95

1. Disconnect the negative battery cable.
2. Remove in the order indicated in the figures.
3. Install in the reverse order of removal.

Scheme 96

Scheme 97

1. Disassemble in the order indicated in the figures.
2. Assemble in the reverse order of disassembly.

Scheme 98

1. To disassemble the bracket, push the stopper down with a small screwdriver.