Removal & Installation
- Wiper motor is located on engine compartment firewall. Disconnect negative battery cable. Remove wiper arms and cowl grille (if necessary). Remove wiper motor cover (if necessary).
- Remove electrical connector. Remove wiper motor or wiper motor bracket attaching bolts. Move motor and adapter plate out slightly. Separate wiper arm/link pivot joint and remove motor. To install, reverse removal procedure.
Disconnect negative battery cable. Remove wiper arm and blade assembly. From underside of hatch, remove upper, side and lower hatch trim (if necessary). Carefully remove hatch screen. Disconnect rear wiper motor electrical connector. Remove wiper motor. To install, reverse removal procedure.
Remove front instrument cluster assembly. Remove left cluster switch assembly. Remove rear wiper/washer switch assembly. To install, reverse removal procedure.