LUBRICATION SPECIFICATIONS
| Material | Condition | Specification |
|---|
| Engine Oil (1) | Ambient Temperature Above -10°F (-23°C) To Over 100°F (38°C) | SAE 10W-30 |
| Engine Oil (1) | Ambient Temperature Less Than -10°F (-23°C) To 60°F (16°C) | SAE 5W-30 |
| Engine Coolant | Above 3°F (-16°C) Above -15°F (-26°C) Above -40°F (-40°C) | 35/65 Mixture 45/55 Mixture 55/45 Mixture Distilled Water Ethylene Glycol |
| Brake Fluid | All | DOT 3 |
| Automatic Transaxle Fluid | All | ATF M-III or DEXRON II |
| (1) Energy conserving oils are recommended, API classification SG", "SH". |
| (1) | Energy conserving oils are recommended, API classification SG", "SH". |
LUBRICATION SPECIFICATIONS
FLUID CAPACITIES
| Item | Condition | (1) Specification |
|---|
| Engine Oil | 2.5L: Drained, With Filter | 4.2 Qts. (4.0L) |
| Engine Oil | 2.5L: Drained | 3.9 Qts. (3.7L) |
| Engine Oil | Miller Cycle Engine Drained, With Filter | 4.3 Qts. (4.1L) |
| Engine Oil | Miller Cycle Engine Drained | 4.0 Qts. (3.8L) |
| Engine Coolant | Drained | 7.9 Qts. (7.5L) |
| Automatic Transaxle Fluid | 2.5L | 8.4 Qts. (8.0L) |
| Automatic Transaxle Fluid | Miller Cycle Engine | 7.8 Qts. (7.5L) |
| A/C Refrigerant | Evacuated | 28.2 oz. (0.8kg) |
| Fuel Tank | Capacity | 18.0 Gal. (68.0L) |
| (1) Capacities are recommended or calculated levels. Always use dipstick (if available) to measure level. |
| (1) | Capacities are recommended or calculated levels. Always use dipstick (if available) to measure level. |
WHEEL TIGHTENING
Tighten lug nuts in crisscross pattern to 87-101 ft. lbs. (120-140 N.m).
BATTERY SPECIFICATIONS
| CAUTION | When battery is disconnected, vehicles equipped with computers may lose memory data. When battery power is restored, driveability problems may exist on some vehicles. These vehicles may require a relearn procedure. See COMPUTER RELEARN PROCEDURES article in the GENERAL INFORMATION section. |
A 12-volt battery with a 300-amp cold cranking rating is specified.
