Intake-Air System [MZI-3.7]: Other Mazda CX-9 I рестайлинг

Open circuit

1. If there is no continuity, the circuit is open. Repair or replace the wiring harness. Throttle body terminal A and PCM terminal 2BO Throttle body terminal B and PCM terminal 2BR

Short circuit

1. If there is continuity, the circuit is shorted. Repair or replace the wiring harness. Throttle body terminal A and power supply Throttle body terminal A and ground Throttle body terminal B and power supply Throttle body terminal B and ground

Scheme 12

1. Disconnect the negative battery cable. (See «BATTERY REMOVAL/INSTALLATION [MZI-3.7]»(ref-663012-S16021955892014101600000) .)
2. Remove the dashboard under cover (Driver side). (See «DASHBOARD UNDER COVER REMOVAL/INSTALLATION»(ref-663022-S31534965712014101600000) .)
3. Remove in the order indicated in the table in the illustration.
4. Install in the reverse order of removal.