GPS ANTENNA FEEDER INSPECTION
- Disconnect the negative battery cable.
- Remove the following parts: Front console box mat (See «FRONT CONSOLE BOX MAT REMOVAL/INSTALLATION»(ref-663022-S21869071382014101600000) .) Indicator panel (See «INDICATOR PANEL REMOVAL/INSTALLATION»(ref-663022-S05956493772014101600000) .) Decoration panel (See «DECORATION PANEL REMOVAL/INSTALLATION»(ref-663022-S35013114172014101600000) .) Front console box (See «FRONT CONSOLE BOX REMOVAL/INSTALLATION»(ref-663022-S12692561512014101600000) .) Center panel (See «CENTER PANEL REMOVAL/INSTALLATION»(ref-663022-S15432009222014101600000) .) Car-navigation unit (See «CAR-NAVIGATION UNIT REMOVAL/INSTALLATION»(ref-663028-S37587984622014101600000) .)
- Disconnect the GPS antenna connector. (See «GPS ANTENNA REMOVAL/INSTALLATION»(ref-663028-S27425395062014101600000) .)
- Verify that the continuity is as indicated in the illustration below.
Scheme 3
Scheme 3: Without Car-Navigation System And With Bluetooth System
Scheme 4
- If not as indicated in the illustration below, replace the GPS antenna feeder.
Scheme 5
Scheme 5: With Car-Navigation System And Without Bluetooth System
- If not as indicated in the illustration below, replace the GPS antenna feeder.
Scheme 6
Scheme 6: With Car-Navigation System And With Bluetooth System
Scheme 7
- If not as indicated in the illustration below, replace the GPS antenna feeder.
ACCESSORY SOCKET INSPECTION
- Connect a tester as shown in the illustration below and verify that there is continuity. If the continuity cannot be verified, replace the accessory socket.