Home ReviewsRefund
Home/Mazda/CX-7/Mazda CX-7 I facelift (2009-2012)/Repair manual/Communication Devices/Control System (Vehicle Communication): Overview
Contents Wiring diagrams Section: Communication Devices All sections

Control System (Vehicle Communication): Overview Mazda CX-7 I facelift

Communication Devices 2 illustrations

Scheme 21

Scheme 21: CONTROL SYSTEM LOCATION INDEX
Scheme 21: CONTROL SYSTEM LOCATION INDEX

Scheme 22

Scheme 22: BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION
Scheme 22: BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION
  1. Disconnect the negative battery cable.
  2. Remove the front scuff plate inner (LH). (See «FRONT SCUFF PLATE REMOVAL/INSTALLATION»(ref-343786-S38441409102009101500000) )
  3. Remove the front side trim (LH). (See «FRONT SIDE TRIM REMOVAL/INSTALLATION»(ref-343786-S15930681492009101500000) )
  4. Remove in the order indicated in the illustration.
  5. Install in the reverse order of removal.

More articles — Control System (Vehicle Communication)