Canister Drain Cut Valve
Remove Canister Drain Cut Valve (CDCV). See CANISTER DRAIN CUT VALVE LOCATIONS table. Apply air pressure to CDCV port "A". (Scheme 21) Air should flow from port "B". Using jumper wires, apply battery voltage to CDCV terminals. Apply air pressure to port "A". Air should not flow from port "B". If CDCV does not operate as specified, replace CDCV.
| Application | Location |
|---|---|
| Miata | To Right Of Canister |
| Millenia | Left Side Of Trunk |
| Protege | Near Fuel Filler |
| 626 | On Rear Of Fuel Tank |
CANISTER DRAIN CUT VALVE LOCATIONS
