Home ReviewsRefund
Home/Mazda/6/Mazda 6 GH рестайлинг (2009-2013)/Repair manual/Ignition Switch/steering Lock/Power Systems: Removal & Installation
Contents Section: Ignition Switch/steering Lock All sections

Power Systems: Removal & Installation Mazda 6 GH рестайлинг

Ignition Switch/steering Lock 4 illustrations

MAIN FUSE REMOVAL/INSTALLATION

  1. Disconnect the negative battery cable.
  2. Remove the nuts.
  3. Remove the main fuse from the main fuse block.
  4. Install in the reverse order of removal.

Scheme 21

Scheme 21
Scheme 21

Scheme 22

Scheme 22: IGNITION SWITCH REMOVAL/INSTALLATION [WITHOUT ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM]
Scheme 22: IGNITION SWITCH REMOVAL/INSTALLATION [WITHOUT ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM]

Scheme 23

Scheme 23
Scheme 23
  1. Disconnect the negative battery cable.
  2. Remove the column cover. (See «COLUMN COVER REMOVAL/INSTALLATION»(ref-448656-S12743804542012012000000) .)
  3. Pull the pin in the direction of the arrow shown in the illustration and release the lock.
  4. Disconnect the connector.
  5. Remove the screw.
  6. Remove the tabs.
  7. Remove the ignition switch.
  8. Install in the reverse order of removal.

Scheme 24

Scheme 24
Scheme 24

More articles — Power Systems