Scheme 1
| 1 | Drive shaft (See DRIVE SHAFT INSPECTION .) (See DRIVE SHAFT REMOVAL/INSTALLATION .) (See DRIVE SHAFT (TRIPOD JOINT) DISASSEMBLY/ASSEMBLY .) (See DRIVE SHAFT (DOUBLE OFFSET JOINT) DISASSEMBLY/ASSEMBLY .) |
|---|---|
| 2 | Joint shaft (See JOINT SHAFT INSPECTION .) (See JOINT SHAFT REMOVAL/INSTALLATION .) (See JOINT SHAFT DISASSEMBLY [MZR 2.5] .) (See JOINT SHAFT DISASSEMBLY [MZI 3.7 V6] .) (See JOINT SHAFT ASSEMBLY [MZR 2.5] .) (See JOINT SHAFT ASSEMBLY [MZI 3.7 V6] .) |
DRIVE SHAFT AND JOINT SHAFT REFERENCE CHART
Scheme 2
- Inspect the connections for any looseness. If there is any malfunction, tighten or replace the applicable part.
- Inspect the dust boot for damage and cracks. If there is any malfunction, replace the applicable part.
- Move the spline and joint up and down, left and right by hand and verify that there is no excessive play. If there is any malfunction, replace the applicable part.