Home ReviewsRefund
Home/Mazda/5/Mazda 5 I рестайлинг (2007-2010)/Repair manual/Testing & Diagnostics/Engine Control System (L3): Overview
Contents Section: Testing & Diagnostics All sections

Engine Control System (L3): Overview Mazda 5 I рестайлинг

Testing & Diagnostics 5 illustrations

Scheme 1

Scheme 1: CONTROL SYSTEM LOCATION INDEX [L3]
Scheme 1: CONTROL SYSTEM LOCATION INDEX [L3]

Scheme 2

Scheme 2: CONTROL SYSTEM DIAGRAM [L3]
Scheme 2: CONTROL SYSTEM DIAGRAM [L3]

Scheme 3

Scheme 3: CONTROL SYSTEM WIRING DIAGRAM [L3]
Scheme 3: CONTROL SYSTEM WIRING DIAGRAM [L3]

Scheme 4

Scheme 4
Scheme 4

Scheme 5

Scheme 5: PCM REMOVAL/INSTALLATION [L3]
Scheme 5: PCM REMOVAL/INSTALLATION [L3]
  1. When replacing the PCM, perform the following: PCM configuration (See «PCM CONFIGURATION [L3]».)
  2. Remove the battery cover, battery duct, battery and battery tray with PCM. (See «BATTERY REMOVAL/INSTALLATION [L3]».)
  3. Disconnect the PCM connector.
  4. Remove the PCM from the battery tray.
  5. When replacing the PCM on the vehicles, perform the following: PCM parameter reset (See «IMMOBILIZER SYSTEM COMPONENT REPLACEMENT/KEY ADDITION AND CLEARING [KEYLESS ENTRY SYSTEM]».)
  6. Install in the reverse order of removal.

See also:
• DTC TABLE [L3]

More articles — Engine Control System (L3)