Home ReviewsRefund
Home/Mazda/3/Mazda 3 BM (2013-2016)/Repair manual/Manual Transaxle - Overhaul (G35M-R): Overhaul/TRANSAXLE CASE COMPONENT ASSEMBLY NOTE
Contents Wiring diagrams Section: Manual Transaxle - Overhaul (G35M-R): Overhaul All sections

TRANSAXLE CASE COMPONENT ASSEMBLY NOTE Mazda 3 BM

Manual Transaxle - Overhaul (G35M-R): Overhaul 1 illustration

TRANSAXLE CASE COMPONENT ASSEMBLY NOTE

  1. Apply a thin coat of sealant to the contact surfaces of the clutch housing and transaxle case, and tighten the transaxle case installation bolts to the specified torque. Tightening Torque 37.3-52.0 N.m {3.8-5.3 kgf.m, 28-38 ft.lbf}
  2. Install the SSTs through the drive shaft and joint shaft hole.

Scheme 93

Scheme 93
Scheme 93