Home ReviewsRefund
Home/Mazda/3/Mazda 3 BL рестайлинг (2011-2013)/Repair manual/Electronic Steering/General Procedures - Steering System: Other
Contents Section: Electronic Steering All sections

General Procedures - Steering System: Other Mazda 3 BL рестайлинг

Electronic Steering ~105 words

Connector Disconnection

  1. Disconnect the negative battery cable before performing any work that requires handling of connectors. (See «BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5]»(ref-520388-S24063200782013010300000) .) (See «BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0]»(ref-520427-S28538867222013010300000) .) (See «BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI TURBO]»(ref-520412-S07601908282013010300000) .)

Electro Hydraulic Power Assist Steering (EHPAS) Related Parts

CAUTIONIf the configuration procedure is not completed, the EHPAS will not operate properly and it might cause an unexpected accident. Therefore, when replacing or removing the electric power steering oil pump component, make sure to perform the configuration procedure to ensure the proper EHPAS operation.
  1. Make sure that there are no DTCs in the EHPAS memory after working on EHPAS related parts. If there are any codes in the memory, clear them.
  2. When replacing or removing the electric power steering oil pump component, perform the configuration procedures. (See «ELECTRO HYDRAULIC POWER ASSIST STEERING (EHPAS) CONTROL MODULE CONFIGURATION»(ref-520445-S04713580662013010300000) .)

More articles — General Procedures - Steering System