Home ReviewsRefund Car not listed?
Home/Mazda/3/Mazda 3 BL (2008-2011)/Repair manual/Lubrication System/Engine Mechanical -- Lubrication (L3 with TC): Overview
Contents Wiring diagrams Section: Lubrication System All sections

Engine Mechanical -- Lubrication (L3 with TC): Overview Mazda 3 BL

Lubrication System 2 illustrations

Scheme 1

Scheme 1: LUBRICATION SYSTEM LOCATION INDEX [L3 WITH TC]
Scheme 1: LUBRICATION SYSTEM LOCATION INDEX [L3 WITH TC]

Scheme 2

Scheme 2: ENGINE OIL LEVEL INSPECTION [L3 WITH TC]
Scheme 2: ENGINE OIL LEVEL INSPECTION [L3 WITH TC]
  1. Position the vehicle on level ground.
  2. Warm up the engine.
  3. Stop the engine and allow approx. 5 min before continuing.
  4. Remove the dipstick and verify that the oil level is between the MIN and MAX marks on the dipstick. If the oil level is below the MIN mark, add engine oil.

More articles — Engine Mechanical -- Lubrication (L3 with TC)