WHEEL HUB, STEERING KNUCKLE REMOVAL/INSTALLATION
| CAUTION | Performing the following procedures without first removing the ABS wheel-speed sensor may possibly cause an open circuit in the wiring harness if it is pulled by mistake. Before performing the following procedures, disconnect the ABS wheel-speed sensor connector (wheel hub side) and fix the wiring harness to an appropriate place where it will not be pulled by mistake while servicing the vehicle. |
Scheme 3
- Remove in the order indicated in the table.
- Install in the reverse order of removal.
Brake Caliper Component Removal Note
- Remove the brake caliper component from the trailing link and suspend it out of the way using a cable.
