Front wheel alignment (unloaded)*1
| Item | Fuel gauge indication |
|---|
| Empty | 1/4 | 1/2 | 3/4 | Full |
| Maximum steering angle [Tolerance ±3°] | Inner | 40°12' |
| Outer | 33°12' |
| Total toe-in | Tire [Tolerance ±4 {0.2}] | (mm {in}) | 3 {0.1} |
| Rim inner | 2±3 {0.08±0.1} |
| (degree) | 0°19' ±0°24' |
| Caster angle (1) (Reference value) [Tolerance ±1°] | 3°34' | 3°36' | 3°38' | 3°41' | 3°43' |
| Camber angle (1) (Reference value) [Tolerance ±1°] | 0°44' | 0°44' | 0°45' | 0°45' | 0°45' |
| Steering axis inclination (Reference value) | 13°26' | 13°27' | 13°27' | 13°28' | 13°29' |
| (1) Difference between left and right must not exceed 1°30'. |
| (1) | Difference between left and right must not exceed 1°30'. |
*1 Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.
Rear wheel alignment (unloaded)*1
| Item | Fuel gauge indication |
|---|
| Empty | 1/4 | 1/2 | 3/4 | Full |
| Total toe-in (Reference value) | Tire [Tolerance ±4 {0.2}] | (mm {in}) | 4 {0.2} |
| Rim inner | 2±3 {0.08±0.1} |
| (degree) | 0°22' ±0°24' |
| Camber angle (1) (Reference value) [Tolerance ±1°] | 1°31' |
| Thrust angle (Reference value) [Tolerance ±0°48'] | 0° |
| (1) Difference between left and right must not exceed 1°30'. |
| (1) | Difference between left and right must not exceed 1°30'. |
*1 Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.
| Item | Specification |
|---|
| Front lower arm ball joint rotational torque | 3.2 N.m {33 kgf.cm, 28 in.lbf} max. Pull scale reading [32 N {3.3 kgf, 7.2 lbf} max.] |
| Front stabilizer control link ball joint rotational torque | 0.8 N.m {82 kgf.cm, 7.1 in.lbf} max. |
