Uni-Body, Subframe and Mounting System: Removal & Installation Lincoln MKX I

REMOVAL

Note. There are 2 rear drive unit (RDU) bushings in the rear subframe, this procedure shows how to remove one bushing. The procedure for the remaining RDU bushing is identical.

1. Remove the RDU. For additional information, refer to «REAR DRIVE AXLE/DIFFERENTIAL»(ref-292562) article.
2. Assemble the special tools to the rear subframe and press out the bushing.

INSTALLATION

Note. There are 2 RDU bushings in the subframe, this procedure shows how to install one bushing. The procedure for the remaining RDU bushing is identical.

1. Install the RDU bushing into the special tool.
2. Install the special tool onto the RDU bushing.
3. Inspect the rear subframe to find the revision part number.
4. Install the RDU bushing into the subframe.
5. Install the RDU. For additional information, refer to «REAR DRIVE AXLE/DIFFERENTIAL»(ref-292562) article.