Principles of Operation
Configurable modules accommodate a variety of vehicle options, eliminating the need for many unique modules for one vehicle line. These modules must be configured when replaced as part of a repair procedure. Configurable modules should not be exchanged between vehicles since the settings are unique to each vehicle. Failure to configure a new module may result in incorrect operation and/or DTCs setting.
The following are the 3 different methods of configuration
- Programmable Module Installation (PMI)
- Module reprogramming ("flashing")
- Programmable parameters
Some modules do not support all 3 methods.
Vehicle Identification (VID) Block
Some PCMs contain a memory area called a Vehicle Identification (VID) block. The PCM VID block commonly stores powertrain configuration items such as Vehicle Identification Number (VIN), tire size, axle ratio, and whether or not the vehicle is equipped with speed control.
Transmission Identification Block
Some PCMs contain a memory area called a transmission identification block. The PCM transmission identification block stores solenoid body flow data. If the solenoid body information is not correct, transaxle damage or driveability concerns can occur. Refer to AUTOMATIC TRANSAXLE/TRANSMISSION - 6F50/6F55 .
See also:
• AUTOMATIC TRANSAXLE/TRANSMISSION - 6F50/6F55