WHEEL ALIGNMENT SPECIFICATIONS & PROCEDURES
See appropriate SPECIFICATIONS & PROCEDURES article in WHEEL ALIGNMENT.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Axle Hub Lock Nut | 147 (199) | |
| Brake Caliper Bolts | 87 (118) | |
| Camber Adjusting Cam Nut | 127 (172) | |
| Lower Control Arm Assembly | 121 (164) | |
| Lower Control Arm-To-Lower Ball Joint | 119 (162) | |
| Lower Ball Joint | 83 (113) | |
| No. 2 Lower Control Arm-To-Lower Control Arm | 44 (59) | |
| Piston Rod Lock Nut | 21 (28) | |
| Shock Absorber-To-Shock Absorber Bracket | 116 (157) | |
| Spring Support Reinforcement | 41 (56) | |
| Stabilizer Bar Link-To-Lower Control Arm | 83 (113) | |
| Stabilizer Link | 83 (113) | |
| Stabilizer Link-To-Stabilizer Bar | 38 (51) | |
| Steering Gear Assembly | 48 (65) | |
| Steering Knuckle-To-Lower Ball Joint | 83 (113) | |
| Steering Knuckle-To-Upper Control Arm | 64 (87) | |
| Steering Rack Housing Bracket No. 2 | 48 (65) | |
| Strut Bar Bracket | 43 (58) | |
| Suspension Arm Sub-Assembly & Strut Bar Bracket (1) | ||
| Bolt A | 121 (164) | |
| Nut B | 112 (152) | |
| Suspension Member Brace Bolts | 41 (56) | |
| Suspension Member Brace Rear Nuts | 43 (58) | |
| Suspension Upper Arm-To-Steering Knuckle | 64 (87) | |
| Tie Rod-To-Lower Ball Joint | 64 (87) | |
| Upper Control Arm | 39 (53) | |
| Wheel Hub Ornament | 15 (20) | |
| Wheel Lug Nut | 76 (103) | |
| INCH Lbs. (N.m) | ||
| Speed Sensor Wire Harness | 48 (5) | |
| ABS Speed Sensor-To-Steering Knuckle | 69 (7.8) | |
| Brake Dust Cover-To-Steering Knuckle | 74 (8.3) | |
| Height Control Sensor Link | 48 (5.4) | |
| (1) see scheme 39 | ||
| (1) | See scheme 39 |
TORQUE SPECIFICATIONS
